Новый сайт ООО "Центр ультразвуковых технологий" находится по адресу
www.u-sonic.ru

На сайте размещена информации об исследовательской и научной деятельности в области создания и исследования ультразвуковых технологий и оборудования.


Коммерческая версия сайта ООО "Центр ультразвуковых технологий" находится по новому адресу
www.u-sonic.com


Ultrasonic devices for flowing processing of liquid

  • ImageMagick could not be found. The admin will need to set the path on the image toolkit page.
  • ImageMagick could not be found. The admin will need to set the path on the image toolkit page.
  • ImageMagick could not be found. The admin will need to set the path on the image toolkit page.
  • ImageMagick could not be found. The admin will need to set the path on the image toolkit page.
  • ImageMagick could not be found. The admin will need to set the path on the image toolkit page.
  • ImageMagick could not be found. The admin will need to set the path on the image toolkit page.
  • ImageMagick could not be found. The admin will need to set the path on the image toolkit page.
  • ImageMagick could not be found. The admin will need to set the path on the image toolkit page.

Device for ultrasonic processing of melts and hot liquids "Phoinix-US-2"

Аппарат для ультразвуковой обработки расплавов и горячих жидкостей «Феникс-УЗ-2»


Model UZTA-1/22-OA


This device is used for high-intensity ultrasonic processing of liquid and liquid dispersed media (molten metals, salt melts, oils, solder alloys and etc) at high temperature and under high pressure (up 1 MPa).

Device for ultrasonic processing of melts and hot liquids "Phoenix-US"

Аппарат для ультразвуковой обработки расплавов и горячих жидкостей «Феникс-УЗ»


Model UZTA-0,8/22- OA

This device is used for high-intensity ultrasonic processing of liquid and liquid dispersed media (molten metals, salt melts, oils, solder alloys and etc) at high temperature and under high pressure (up 1 MPa).

Ultrasonic technological device “Bulava-P”

Аппарат ультразвуковой проточный  «Булава-П»

Model UTA-1000-3-P

Function: Ultrasonic technological device is intended for high-intensity ultrasonic running liquid and liquid dispersed media processing. It can be installed in the pipe line or in special technological vessels.

Ultrasonic technological device “Bulava-PS”

Аппарат ультразвуковой проточный серии «Булава-П» Модель УЗАП-3/22-ОПСт

Model UTA-1000-3-PS

Function: Ultrasonic device is intended for high-intensity cavitational liquid and liquid dispersed media processing in a thin layer between emanating surface of the half-wave titanium emitter and interior wall of the technological volume in a running mode.

Ultrasonic technological device “Izgib”

Аппарат ультразвуковой проточный серии «Поток» Модель УЗАП-3/22-ОПг

Model UZTA-3/22

Function: flowing continuous liquid media processing by high-intensity ultrasonic vibrations in natural water reservoirs and in technological vessels (tanks), channels, pipelines. The device can be also used for productivity increase of oil wells.

Ultrasonic technological device “Potok-3”

Аппарат ультразвуковой проточный «Поток-3»


Model UZTA-2.5/22-P


The device is intended for ultrasonic liquid media processing (solution, emulsification, sterilization, extraction).The work of the device is based on the use of the high-intensity cavitational effect on liquid and liquid dispersed media.

Device for ultrasonic flowing processing of liquid media “Potok-1M”

Аппарат для проточной ультразвуковой обработки жидких сред «Поток-1М»


Model UZTA-1/22-M1


Ultrasonic device is intended for cavitational liquid and liquid dispersed media processing in periodic and flowing conditions and can be used for emulsification, homogenization, sterilization, mixing, dispersion, etc.

Device for ultrasonic flowing processing of liquid media “Bulava-P”

Аппарат ультразвуковой проточный серии «Булава-П» Модель УЗАП-8/22-ОП

Model UZTA-8/22-OP

Ultrasonic device is intended for flowing processing of big volume of liquid and liquid dispersed media by high intensity ultrasonic oscillations.

Ultrasonic device with a multiregion emitter

Установка ультразвуковой обработки жидких сред с аппаратом серии «Булава-П» Модель УЗАП-3/22-ПСтЛ

Model UTA-1000-3-PS

Ultrasonic device is intended for high-intensity cavitational liquid and liquid dispersed media processing in a thin layer with the help of the ultrasonic multiregion emitter.